Stainless Steel Flux Cored Wire


E308LT

E308LT is a gas-shielded, flux cored, stainless steel electrode has a nominal weld metal composition of 20% chromium, 10% nickel and a maximum carbon content of 0.04%. E308LT's low carbon minimizes carbide precipitation and makes it more resistant to intergranular corrosion. Produces finely rippled, even and well washed bead. Smooth arc transfer with minimal spatter. Freely peeling slag minimizes cleanup time.

E309LT

E309LT is a gas-shielded, flux cored, stainless steel electrode with a nominal weld composition of 24% chromium, 13% nickel and a maximum carbon content of 0.04%. Carbide precipitation is minimized and the weld metal more resistant to intergranular corrosion due to the wire's low carbon content. Smooth arc transfer with minimal spatter. Produces finely rippled, even and well washed bead. Minimizes cleanup time due to freely peeling slag.

E310T

E310T is a gas-shielded, rutile flux cored, stainless steel wire with a nominal weld composition of 25% chromium and 20% nickel content. Excellent X-ray soundness. Attractive bead appearance, very good penetration and high productivity. Welded with classical economical Ar-CO2 mixtures or CO2

E312T

E312T is a flux cored, stainless steel electrode designed with a weld metal composition of 30% chromium, 9% nickel and 0.1% carbon. This wire produces a two-phase weld metal with substantial ferrite in an austenitic matrix. High level of ferrite makes the weld metal very resistant to cracking, even when highly diluted. Superb all position electrode performance. Flat, well washed beads with minimal weaving. Spatter is very low. Slag peeling is excellent.

E316LT

E316LT is a gas-shielded, flux cored, stainless steel electrode is composed of 19% chromium, 12.5% nickel, 2.5% molybdenum and no more than 0.04% carbon. The molybdenum in E316LT improves resistance to pitting and provides increased creep resistance. Its low carbon content minimizes carbide precipitation and resists intergranular corrosion. A smooth arc transfer with minimal spatter. Produces finely rippled, well washed bead. Handles marine environments. Minimizes cleanup time.

E317LT

E317LT is a gas-shielded, flux cored, stainless steel electrode offers a nominal weld metal composition of 19.5% chromium, 13% nickel, 3.5% molybdenum and a maximum carbon content of 0.04%. The higher level of molybdenum in SelectAlloy 317L improves resistance to pitting and provides increased creep resistance. Its low carbon content minimizes carbide precipitation and makes it more resistant to intergrannular corrosion. Provides improved pitting resistance. Increases creep resistance. Produces a smooth arc transfer with minimum spatter. Easy peeling slag reduces cleanup time.

E347T

E347T has a nominal weld metal composition of 19.50% chromium, 10% nickel and 0.6% columbium. This gas-shielded, flux cored, stainless steel electrode’s columbium content forms a stable carbide, which reduces chromium carbide precipitation and makes the weld metal more resistant to intergranular corrosion. Produces a finely rippled, even and well washed bead. Freely peeling slag reduces cleanup time. Smooth arc transfer with minimal spatter.

E409T

E409T is a flux cored, electrode with a nominal composition of 12% chromium, with titanium added as a stabilizer to produce a ferritic microstructure.

E410T

E410T contains 12% chromium, is a flux cored electrode designed for single or multiple pass welding in the flat or horizontal positions. The weld deposit is air hardening and is normally heat-treated after welding. Low spatter. Smooth spray arc transfer. Produces finely rippled bead. Self peeling slag minimizes cleanup time.

E410NiMoT

E410NiMoT is a flux cored, gas-shielded electrode for welding martensitic stainless steel in the flat and horizontal positions. Select 410NiMo is nominally composed of 12% chromium, 4.5% nickel and 0.65% molybdenum and a maximum carbon content of .06%. Accurate and consistent deposit composition. Very good feedability. Excellent bead cosmetics. Smooth, stable arc transfer. Nearly self-peeling slag and low spatter residue.

E2209T

E2209T is a flux cored electrode designed to weld duplex stainless steels of the 22Cr-9Ni-2Mo-N type. The weld deposit has a "duplex" microstructure of austenite and ferrite and normally gives ferrite in the range of 25-40 FN. Argon with 20-25% CO2 is the recommended shielding gas. Bead is shiny, smooth and silvery. Provides a stable, smooth arc with very low spatter. Superb performance in all positions.

E2553T

E2553T is a flux cored, all position electrode with a nominal composition of 25% chromium, 9.5% nickel, 3.5% molybdenum, 2% copper and 0.2% nitrogen,E2553T is used to weld duplex stainless steels which contain approximately 25% chromium. It offers greater resistance to intergranular corrosion, pitting and stress corrosion cracking than 2209. Superb all position performance. Smooth, stable arc with very low spatter. Bead is shiny, smooth and silvery in appearance. Slag removes easily.

Other Available Alloys

  • E320T0-1
  • E320T0-4
  • E320T1-1
  • E320T1-4
  • E330T0-1
  • E330T0-4
  • E330T1-1
  • E330T1-4
  • E430TX-X

Please call for more information!